Let op! het opgegeven BTW nummer is niet geldig.

SC1B

StyliCleaner® for cleaning single probes with large diameter.
Usable for probes with a diameter in a range of Ø6mm till Ø12mm and a minimum styli length of 20mm.
Cleaning height from the top is 10mm.

GTIN: 8721161166016

✅ Free shipping for all orders over €1000,- 

 3.000,00

Exclusief VAT

Buy Now
SKU 105 Category

Description

Work smarter not harder!

Let the StyliCleaner® SC1B clean your Styli fully automatic under 30 seconds.

The StyliCleaner® SC1B is usable for probes with a maximum diameter of Ø6mm till Ø12mm and a minimum styli length of 20mm.

Benefits of using a StyliCleaner®:

✅ Maximum cleanness
✅ Reliable measurements
✅ Fewer recalibrations
✅ Simultaneous operation
✅ High speed

With the StyliCleaner® you are able to do less and still work more efficient!

 

SPECS

GTIN: 8721161166016

Length: 100mm

Width: 70mm

Hight: 101mm

 

TOTAL PACKAGE CONTAINS:

  • Cleaning unit
  • Steering unit
  • T-piece with 2 hose clamps to drain air from the CMM’s air hose
  • Air hose for between T piece and steering unit, 2 meter 6 mm
  • Air hose for between steering unit and cleaning unit, 2 meter 4 mm
  • Bolt m8x20 with washer for fixing the cleaning unit to the table
  • Hex key for the M8 bolt
  • AC/DC adapter for feeding the steeringunit with 24VDC
  •  Tieraps 10 pcs and 5 stickers to neatly hide the cables
  • 2 spare O rings for the nebuliser
  • Manual

Processing time: 1-3 business days

Delivery time: 1-10 business days

Cleaning the probe

Cleaning a probe with the StyliCleaner® is started as soon as the probe moves past the motion sensor. From the moment of activation, air will be blown to the cleaning unit for 20 seconds. During the first 10 seconds, a cleaning liquid will be added to the compressed air. During the last 10 seconds, only dry air will be blown onto the probe.

This means that the measuring pin will always be dry after cleaning. While cleaning the measuring pin, it must make a number of movements. The zero point for the indicated displacements is located at the top and in the heart of the cleaning unit. Cleaning of the measuring pin takes place 13mm below the top of the cleaning unit.

Your Cart

No Item Found
Subtotal  0,00
Shipping  0,00
Tax  0,00
Total  0,00
0