Mounting bracket, for mounting a StyliCleaner on a Renishaw MRS-rack.
GTIN: 8721161166092
€ 132,00
Exclusief VAT
Mounting bracket, for mounting a StyliCleaner on a Renishaw MRS-rack.
GTIN: 8721161166092
Cleaning a probe with the StyliCleaner® is started as soon as the probe moves past the motion sensor. From the moment of activation, air will be blown to the cleaning unit for 20 seconds. During the first 10 seconds, a cleaning liquid will be added to the compressed air. During the last 10 seconds, only dry air will be blown onto the probe.
This means that the measuring pin will always be dry after cleaning. While cleaning the measuring pin, it must make a number of movements. The zero point for the indicated displacements is located at the top and in the heart of the cleaning unit. Cleaning of the measuring pin takes place 13mm below the top of the cleaning unit.
Special holder, to mount the SC1 StyliCleaner series vertically instead of the horizontal way.
This mounting bracket is used when cleaning star-styli or other cross-like Styli. Delivery is included with nessecary bolts for mounting, aligning tool and manual. The manual can also be found in the download section.
GTIN: 8721161166108
Special holder, to hang the control unit on the side of the measuring machine.
This holder is special designed for Mitutoyo Crysta-Apex-V and STRATO-Apex machines.
Inner width at the top of the holder plate is 25mm.
GTIN:8721161166085
Special holder, to hang the control unit on the side of the measuring machine.
This holder is special designed for Mitutoyo Crysta-Apex-C and Crysta-Apex-S machines.
Inner width at the top of the holder plate is 55mm.
GTIN: 8721161166078
StyliCleaner® is a worldwide patented product, proudly developed and produced by StyliCleaner B.V. in the Netherlands.